🛠️ Interior Door Installation Guide

IronDoor.com interior series include the following pre-installed accessories, ensuring a smooth and hassle-free installation:

• Tempered Glass (Operable if applicable)
• Steel Hinges
  
• Stylish Matching Handle
• T-Astragal (for wine cellar doors)
• Reinforced Heavy-Duty SteelLock Anchors
• Weather Stripping
  
• 2" Steel Jamb

This ensures a hassle-free setup, making the install easier for your installer.

Let's Get Started!

⏳ Time Required: Installation typically takes 2-3 hours. We highly recommend hiring a professional installer with experience in iron doors for the best results. However, some of our customers successfully install their doors on their own.

⚠️ Note: If using a razor knife, be extra careful to avoid accidentally cutting into the door or jamb.

Step 1: Move the Crate to the Setup Location

Our doors are extremely durable and heavy, so for a safe and smooth installation, we recommend:

• Single Door: 2 people for handling
• Double Door: 3 people for handling
  
• Pivot Door: 4 people for handling

Take your time and lift carefully to avoid injury!

Step 2: Check Rough-Opening Measurements

Before unboxing the door crate, measure your rough opening to ensure it is:

• .5" wider than your new interior door
• At least 0.25" taller than your new interior door

📄 You can find your door size on your receipt. Double-checking these measurements ensures a perfect fit!

Step 3: Inspect & Unbox Door

• Inspect the crate for any damage. If you notice any issues, take photos 📸 before unboxing.
• Unbox the door and jamb with the glass side facing up 🪟. The CAD drawing will be on the same side as the glass.
• Check for any damage once it's unboxed.

🚨 If you notice any damage:
📷 Take photos immediately and submit them within 24 hours for warranty coverage.

If the crate was damaged during shipping and caused damage to the door, it may be covered by the shipper's insurance.

Step 5: Remove Door from Jamb

Remove the door panel from the jamb and center the jamb in the opening while making sure the sides also stay level. If necessary, remove any drywall to ensure a direct and secure connection to the framing stud. Use composite shims if needed for leveling. 

⚠️ Note: Make sure the jamb is 100% level on all sides to ensure proper fit and functionality. 

Step 6: Secure Jamb with Screws

Once the jamb is completely level and room for adjustment on the sides, secure it to the framing by bolting the top installation tab directly to the top header. It's best to leave the side bolts lose until after the door panels are installed to allow movement to align door panels perfectly.

Step 7: Install Door Panels

Before installing the door panels on the hinges first make sure the washer is placed down.

• If installing a double door install the nonactive door first.
  

Install the door panel while it is open at a 90-degree angle from the closed position. With the help of 2-3 people and a pry bar to lift from the bottom, carefully lift the door and slowly lower it onto the hinges once properly aligned.

Close the door and lock into place with flushbolt for double or lever lock for single. Make sure everything feels and operates smooth. If the door doesn't shut properly check if it's  level and properly aligned.

🔄 Repeat step 7 if installing a double door.

Once the door(s) open and close smoothly, and the gaps are even from top to bottom, secure the jamb by tightening the side installation screws and double check closure.

Step 9: Install Handles

You're Almost There! 🎉

For a seamless and hassle-free installation, the only step left is attaching the handle.

Easy Handle Installation:

1. Use an Allen wrench to separate the handles.
2. Align the mounting screw with the pre-drilled holes in the door panel.
3. Secure the handle by tightening the Allen bolt on the side.

Step 10: Clean & Enjoy

Gently clean the door using a mixture of mild dish soap and water. Use a soft microfiber cloth to wipe down the surface, ensuring a streak-free and scratch-free finish.

Enjoy your new steel interior door, designed for both beauty and security! 🚪✨